SawStop SAW-PCS31230TGP252 Professional 10" Cabinet Saw

LIKE NEW, USED ONLY A FEW TIMES, SERIOUS INQUIRIES ONLY, MINT CONDITION NO LOW BALLERS, PURCHASED FROM ATLAS MACHINERY SawStop SAW-PCS31230TGP252 Professional 10" Cabinet Saw 3HP, 230V, 60Hz with 52" T-Glide Professional 10" Cabinet Saw 3HP, 230V, 60Hz, with 52" Professional T-Glide Fence system assembly including table Overall saw dimensions: 44" w x 29 3/4" d x 34" h 69 1/8" w x 33" d x 34" h (w/ T-Glide Fence System & 36" rails) 85 1/4" w x 33" d x 34" h (w/ T-Glide Fence System & 52" rails) Motor: 3 hp, 1 phase, 230 V, 13 A Cabinet footprint: 19 3/8" w x 19 3/8" d Cast iron table: 20" w x 27" d, 44" w x 27" d (w/ extension wings) Extension wing: 12" w x 27" d Extension table (optional): 23 3/4" w x 27" d (36" rails), 40 1/8" w x 27" d (52" rails) Blade: 40-tooth, professional grade, 5/8" arbor Blade diameter: 10" Blade tilt: Left Blade kerf: 0.118" (3mm) Blade plate thickness: 0.078" (2mm) Max. depth of cut, blade at 0": 3 1/8" Max. depth of cut, blade at 45": 2 1/4" Max. rip, left of blade: 12" Dado diameter: 8" (requires a separate brake cartridge and table insert) Dado max. width: 13/16" Arbor diameter at blade: 5/8" Main bearing size: 62mm OD x 30mm ID Second bearing size: 52mm OD x 25mm ID Table in front of blade (max. elevation): 10 1/4" Table behind blade (max. elevation): 7 1/2" Arbor runout: 0.001" Maximum allowable runout Blade lateral movement over full elevation range: 0.006" Maximum Table flatness measured diagonally: 0.010" Maximum gap Overall table and extension wing flatness: 0.025" Maximum gap Blade alignment with miter slot: 0.010" Maximum displacement Deviation of miter gauge indexing stops from actual: "0.25" Alignment between spreader and blade: 0.010" Maximum difference Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep Dust collection port diameter: 4" Riving knife / splitter thickness: 0.078" (2mm) Blade guard: polycarbonate, extends only 5/8" to right of blade Insert: zero clearance, steel core, ABS surfaces Hand wheels: 7" diameter, cast iron with chrome handle Belts: 2 V-ribbed belts ""arbor belt is static dissipative Includes: Professional Integrated Mobile Base Part #:MB-PCS-000 Construction:Fully-welded 1/4” rigid steel Finish:Hard-wearing black powder coat Wheels:Durable polyurethane Wheel Configuration:Two fixed-direction, Two 360° casters Operation:Easy one-foot pedal lift, with release pedal. When not engaged, the cabinet rests directly on the floor Strength:Supports entire table and requires no extension piece – even for the 52″ extension table Brake:No Brake. When disengaged, saw rests firmly on the ground distributing weight directly to the floor, not the wheels Easy-to-follow assembly instructions Not compatible with:RT-TGP In-Line Router Table, TSG-FDC Floating Guard, or SawStop Sliding Tables Includes: Part #: TSA-ODC Compatibility: with most Sawstop cast iron models w/ t-gluide fence systems requires TSGDC blade guard not standard on CNS175 or PCS175 Connection: Custom Y-Port unites above and below-table dust collection into one 4″ port