Eclipse Audio Dual 10s Ported Box

22.6mm xmax on 200 watts. Yup never abused works perfect What you see is what you get, dont know dont ask 2000 firm canadian dollars No lower for eclipse audio dual 10s and box Pure SQ this is epic brand ultimate Cant buy anywhere else too bad your loss this is mint ONLY $2000 nothing lower if you want come get i need the money Can hear before buying and see no damage Can easily clean the shine from dirt Discontinued so heres your chance Any offer less will be ignored ================ Technical Specifications (10" Subwoofer Driver)Frequency Response: 35Hz – 250HzSensitivity (1W/1m SPL): 86dBXmax (One-way Excursion): 0.89 inches (approx. 22.6mm) (The overall series supports a high peak-to-peak travel limit up to 1.17" due to its "bottomless" motor design)Free Air Resonance (Fs): 35HzTotal Speaker Q (Qts): 0.82Equivalent Compliance (Vas): 2.3 cubic feetDirect Current Resistance (DCR): 3.6Ω Here are all the official technical and physical specifications for the classic Eclipse SW6104 10-inch car audio subwoofer.⚡ Power SpecificationsContinuous Power Handling (RMS): 200 Watts RMSMaximum Power Handling: 400 Watts Peak Audio PerformanceFrequency Response: 35 Hz – 250 HzSensitivity (SPL): 86 dB at 1W/1mNominal Impedance: 8Ω + 8Ω Parallel (This means the two 8-Ohm internal coils are wired in parallel straight from the factory, making it act like a standard 4-Ohm subwoofer at the terminals).️ Driver Mechanical BuildSize: 10 inches (250mm)Cone Material: Mica-filled Polypropylene (MFP) composite alloy cone with an inverted dust cap.Suspension & Surround: 3/4-inch wide premium Santoprene rubber surround with a specialized CONEX® dual spider.Voice Coil & Motor: 4-layer long-throw voice coil wrapped on a high-temperature Kapton former. It features a vented pole piece and a "bottomless" motor design to protect the coil during heavy excursion.Basket Structure: "Airovent" chrome-plated steel basket.Terminals: Chrome push terminals designed to accept up to thick 10 AWG speaker wires. Prefabricated Enclosure Models (SW6104BX / SW6104BXD)If your subwoofer came built directly into an official Eclipse factory wooden box, it carries a slightly different model suffix depending on if it is a single or dual setup.Single Enclosure (SW6104BX)Dual Enclosure (SW6104BXD)Number of Subwoofers1 x 10" driverNumber of Subwoofers2 x 10" driversTotal System Power (RMS / Peak)200W RMS / 400W PeakTotal System Power (RMS / Peak)400W RMS / 800W PeakBox Type & StylingSealed, Grey & Black Vinyl CarpetBox Type & StylingSealed, Grey & Black Vinyl CarpetWidth13.5 inches (343 mm)Width23.6 inches (600 mm)Height12.7 inches (323 mm)Height12.7 inches (323 mm)Depth15.3 inches (389 mm)Depth15.3 inches (389 mm)Total Net Weight20.9 lbs (9.6 kg)Total Net Weight46.4 lbs (21.0 kg) DIY Custom Box RecommendationsIf you are planning to build your own box from scratch for the standalone raw driver, aim for these interior space dimensions:Sealed Enclosure: 0.50 to 0.75 cubic feet (Best for snappy, highly accurate sound).Ported Enclosure: 1.0 to 1.25 cubic feet (Tuned to 32Hz–35Hz for extra loud, booming bass).