NEW TrickleStar 7-Outlet AV Advanced PowerStrip+ Multi-Sensor

TrickleStar TS1810 7-Outlet AV Advanced PowerStrip+ Smart-Home, Multi-Sensor, Energy Saving, Fireproof. Factory sealed. Goes for about $80 retail. The Advanced Tier 2 PowerStrip uses advanced technology to work with all TVs, detecting remote and motion activity to monitor usage. It automatically powers off the TV and connected devices when no activity is detected, ensuring energy efficiency. Features ---------- IR & Motion Multi-Sensor: The multi-sensor connects to the powerstrip via the RJ11 port marked “sensor.” Power Connection: The Advanced PowerStrip+ (APS+) must be plugged into a grounded outlet to be properly surge protected. Use of an extension cord, adaptor or other powerstrip in conjunction with the APS+ will void all warranties. Sensor/RJ11 Port: Plug the multi-sensor into this port. There will be a soft, audible “click” when the connector is inserted correctly. Surge LED: When illuminated, it indicates that the surge protection is functioning normally. If this LED does not illuminate, it indicates that the surge protection function has been damaged while protecting your devices, and the product must be replaced. Ground LED: When illuminated, it indicates that the APS+ is correctly grounded. If not illuminated, there is a grounding problem and you must contact an electrician to properly ground the socket. Surge protection will not work with an improperly-grounded outlet. Switched LED: When illuminated, it indicates that the switched outlets have power and devices plugged into them can be used. Resettable Circuit Breaker: If the surge, ground, and switched LEDs are not illuminated and/or electronics plugged into the APS+ won’t turn on, press the circuit breaker to manually activate power. Always-on Outlets: Electronics that require continuous power should be plugged into the always-on outlets. < tv > Outlet: The outlet marked < tv > is the control outlet. IMPORTANT: THE TV MUST BE PLUGGED INTO THIS OUTLET Switched Outlets: If the TV is turned off or there is no IR remote activity or motion detected, the devices plugged into these outlets will automatically turn off. TAV-Link Cable (sold separately): TAV-Link sends high-level CEC commands to certain HDMI connected devices, allowing them to safely store their data and settings prior to powering down.