AirPods Pro 3 replacement (A3064) left earbud only).

This is a single, left-side Apple AirPods Pro 3 earbud model number A3064. It's white and has a silicone ear tip. Lost your other one? This could be what you need! Remember, the left ear is A-3064 and the right ear is A-3063. Be sure to write that down. When pairing a replacement AirPod with an existing older earbud, they will not communicate until they are updated to the exact same firmware version. Follow these steps to sync them: Step 1: Clear the Old Connection Go to your phone or tablet's Bluetooth settings. Tap the "i" (Information) icon next to your AirPods. Select Forget This Device. Step 2: Sync and Charge the Earbuds Place both the replacement earbud and your old earbud into the charging case. Close the lid and connect the case to a wired charger. Keep the case closed and let them charge undisturbed for at least 30 minutes. Why? This allows the charging case to download and install matching firmware onto both earbuds so they can talk to each other. Step 3: Pair Them to Your Device Open the lid of the charging case. The status light should start flashing amber. Press and hold the Setup button on the back of the case. Keep holding it (for about 15 seconds) until the status light flashes amber, and then switches to flashing white. Bring the case close to your device, unlock it, and follow the on-screen setup animation to complete the pairing. If the light stays solid amber or won't flash white after 15 seconds, let me know: Is the case plugged into power while you try to hold the button? Are you getting an "Artifact" or "Not Your AirPods" error message on your screen? Try without personalization