1/2" Digital Torque Adapter

Little screen spot not working The 1/2 inch drive digital torque adapter within 7.4-147.5Ft-lb/10-200Nm torque range. It can measure in both directions, whether in clockwise and counterclockwise, the accuracy is both ±1%. It meets the industrial requirements, exceeding the accuracy of most of the digital torque adapter in the market. The digital torque adapter set has a preset mode and 500 sets of data storage functions, you can preset and save 10 groups torque value from P0 to P9. By preset value and data storage, allow you to quickly access frequently repeated applications. This digital torque adapter has a big advanced LCD display, providing ft-lb, Nm, in-lb, kg-cm four measurement modes. It can easily switch between peak mode and track mode. The PEAK mode can record the maximum torque value. The TRACK mode can display the torque value in real time. When you use the electronic torque adapter approach the target torque, the buzzer will make a regular beep sound, and the LED indicate light will change from a flashing green light to a solid red light to remind you it’s time to stop applying force. Warm Tips: If the buzzer does not sound, in the shutdown state, press and hold the P/T and M buttons at the same time to activate it again. This digital torque adapter can convert any ratchet wrench into an accurate digital torque wrench. It is only 200G in weight and 7.5* 4.5CM in size. Lightweight and hand-sized, easy to operate, storage, and carry. Simple to use, more accurate and convenient than a mechanical wrench. In the shutdown state, when you press P/T and M button at the same time, if you hear one sound, the buzzer will be opened. If you hear two sounds, the buzzer will be closed. You can choose the buzzer turn on or turn off according to your needs.