Adjustable TDP ET-01 INFRARED THERAPY with Mica Lamp
Sold
$150
TDP ET-01 INFRARED THERAPY Lamp with Insulating MICA Disc
‘Special Electromagnetic Spectrum’ lamp (TDP)
With insulating Mica Disk (122mm 4.41”). Consists of 33 mineral elements; 1000 to 1200 life time with4.75" (12 cm) lamp head.
This lamp was used by only one individual for personal use: Joint pain. Total lifetime hours of use 100 hours (if that).
Description
TDP Lamp Infrared Lamp, with Mica Disc, Large Head & Manual Timer
4.75” diameter large head
4.41” mica disc
ON/OFF switch and manual timer (resettable)control for your safety and convenience, time setting ranged from 15 minutes to 60 minutes
Plug in
Certified for compliance for use of Medical Electrical Equipment in healthcare environment
Product Weight: 28 lbs
Technical Specifications
Power Supply: 110V, 275 watts
Power Consumption: <= 250W
Spectrum Range: 2 ~ 25 Microns
Head Rotation
Minimum height with arm bent down: 127 cm
Fully extended height with arm straight up: 179 cm
Head diameter: 19 cm
Base span: 50 cm
Diameter of Mineral Plate: 17 cm
Lifetime of Mineral Plate: 1500 ~ 2000 hours
Manual control timer 0 – 60 minute
Why Use a TDP lamp with a mineral plate
The difference between simple infrared radiation and the TDP lamp is that the TDP lamp incorporates a mineral plate that is heated to ionize the trace minerals.
This plate is composed of a proprietary mineral formulation consisting of 33 elements in 43 chemical binding forms. The principle behind sing the mineral plate is that the heating of the minerals into their ionic state with an infrared warmer is what stimulates many of the body’s natural metabolic processes.
The TDP lamp can be used in reducing inflammation, relieving pain, promoting blood circulation, improving microcirculation, strengthening immunity against disease and improving metabolism.
This is a great adjunct to any treatment. It can also be used in conjunction with moxa balm or spray clinics where smoke and odour are prohibited.
Promotes metabolism, regulates physiological deficiencies, diminishes inflammation and eases pain
Detachable head
Replacement of warmer (heating element) requires professional installation
Operation:
1. Insert the plug into a rated voltage power supply socket. To turn on the power, rotate the timer knob clockwise to the desirable time setting. The indicator will be lit and the lamp will be ready for use after being preheated for 10-15 minutes. Note: Never turn the timer knob counterclockwise or force the timer to return to zero. To terminate the power before time is up, disconnect the power supply.
2. Expose the troubled part of the body or the relevant acupuncture point directly toward the lamp head with a distance of 20 to 30 cm (8 to 12 inches). The best result is obtained when the local skin temperature is kept at 40’C (104’F) or the patient feels comfortable.
A too low temperature will diminish the therapeutic effects and a too high temperature tends to burn the skin.
3. Treatment time length: 20 to 60 minutes each time, 1 or 2 times a day.
Note: The emission plate’s effectiveness decreases after 1,000 hours of usage. Replacement of the emission plate after 1,200 to 1,500 hours is recommended.
Only available for pick-up
- ConditionGood
- BrandTDP ET-01
WHERE TO MEET
SELLER

ZiggyZee
Evergreen
171 review
0 chats0 favorites11 views





