resin

Hi guys I'm selling 4.5kg of RESIN, only reason I'm selling it is because it has a working time of 60min which is perfect for someone who wants to spend more time working on a piece or is mixing alot of colours😀 . . . Description DIPOXY-2K-700 is a low-viscosity crystalline epoxy resin, produced and distributed exclusively in "premium quality". DIPOXY is ideal for almost any application. For example: in the jewellery industry, table manufacturing, so-called "River Table", for floors, ponds, aquariums and terrariums, as well as for the construction of boats, ships and planes. The shape parts can also be cast into silicone moulds, or carbon, aramid and glass fibre compositions are also possible. Also ideal for model making. The best results are obtained with our epoxy pearl effect coloured pigments. Solvent-free 2K-700 dipoxy is mixed in a mixture ratio 2:1 (e.g. 100 g of A and 50 g of B), mass unit (depending on weight) and therefore is easy to work with. Ideally, components A and B are mixed at a temperature of 10 ° C - 20 ° C. Diopxy 2K-700 is in principle self-ventilating, however for best results, it must be respected with a maximum of 250 – 350 rpm. For about 4-5 minutes until both components are well mixed! Warning danger of burns. Once both components are mixed, a chemical reaction is created in which heat is released. Depending on the height of the mixture in a glass or bucket, the heat can not be dissipated quickly enough from the surface. Then always apply the rule: "better wide and flat than high and narrow!" If for example a mixture of 300 ml in a glass about 15 cm high in the closed position, probably (depending on the outside temperature) after 15-25 minutes It becomes so hot that it can burn and then hardens immediately. However, if you fill the same mixture in a bucket and it is only 1 cm high, it will not heat up and you can work well even after 60 minutes.