EC1 Beholder 3-Axis Gimal Stabilizer for DSLR Cameras

Other ·

$500

EC1 BEHOLDER 3-AXIS GIMBAL STABILIZER WITH ENCODERS FOR DSLR AND MIRRORLESS CAMERAS Model: EC1 - Durable All Aluminum Construction - 360 Degree Movement from All Axis (Pitch, Yaw & Roll) - Works with DSLR & Mirrorless Cameras between 2.0 to 4.5 lbs - Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless & DSLR Cameras - OLED Display Screen to show operating modes - Equipped with 32-Bit Controller & 12-Bit Encoder - Lithium Battery Powered- Low Maintenance, Eco-Friendly - Illuminated joystick indicating on-off status The 3-Axis gimbal features three 360° rotating brushless mo-tors that give you a limitless range of motion. 1 x Instruction Manual 1 x Travel Case 1 x Travel Case Shoulder Strap 3 x 18650 Batteries 1 x Micro USB AC Adapter 1 x EC1 Gimbal Stabilizer 1 x Battery Cap with 3/8-16 Mount (Pre-Assembled) 1 x Battery Holder (Pre-Assembled) 1 x Quick Release Plate (Pre-Assembled) 1 x ¼-20 Camera Screw (Pre-Assembled) With a payload range of 2-4.5 lbs, the EC1 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras. Sony a6300, Sony a7SII, Panasonic GH4, and the Canon 5D Mark III are just a few cameras that the EC1 can handle. Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient hand-held stabilizer. In Lock Mode, the Yaw, Pitch, & Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle. Quickly lock your camera into any position by manually point-ing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default. The EC1 features 3 different follow modes. In Yaw-Axis Follow Mode, the EC1 will only follow your Pan movements. In Pitch and Yaw-Axis Follow mode, the EC1 will follow your Pan and Tilt Movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to Pan, Tilt, and Roll. Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes. A display screen located on the back of the handle conve-niently provides you with information on the battery life and operating mode. With a newly designed quick-release baseplate system, the EC1 is easy to balance without the need of any tools. The EC1 handle comes with two 1/4-20 mounts that are per-fect for mounting accessories such as a light, microphone, or monitor. A 3/8-16 thread located on the bottom allows you to securely mount the EC1 to a tripod, jib, or dual handle support system such as the Ikan DGH. Specifications Battery Operating Time Approx 8-10 Hrs Stand-by Battery Time Approx 20 Hrs Battery Charging Time Approx 3-4 Hrs Battery Type 3x 3.7v Li-Ion 18650 Camera Compatibility Most Mirrorless & DSLR Cameras Load Capacity 2000g Working Temperature -10°C to 70°C Working Angles Pan: 360° Roll: 360° Pitch: 360° Tripod Mounting Thread 3/8"-16 Accessory Mounting Threads 1 x 1/4"-20 Dimensions 360 x 79 x 184 mm Dimensions: 15.75 x 8.5 x 3.75 In. Weight: 6 lbs Essential Accessories DGH EXT-K01 MC-90 MS-E002 ICH-SC4 IB-18650-26 Dual Grip Handle & Tray for Beholder Gimbal Stabilizers Beholder Joystick Extensions for Camera Gimbals (1m) Carbon Fiber Monopod (E-Image) Battery Holder 4 Battery Universal Smart LCD Charger 18650 3.7V Li-Ion Battery Cash, E-Transfer, or Credit Card Firm on Price