Brake Caliper Cover for BMW X1 X2 X3 X4 X5 X6

Compatible with 16,17,18,19 inch wheels. Brake Caliper Covers – Front & Rear Set (2 Front + 2 Rear) ✅ 100% Brand New ✅ High-Quality Durable Plastic ✅ Easy Installation with High-Temperature Silicone Adhesive (not included) 📏 Please Check Compatibility Before Purchasing: Ensure that the size of your vehicle’s brake calipers is compatible with the covers listed below: Front (Large Size): 280mm x 65mm x 60mm Rear (Small Size): 230mm x 65mm x 40mm We recommend measuring your calipers before ordering. 📦 What’s Included: 2x Front Brake Caliper Covers 2x Rear Brake Caliper Covers 🛠 Installation Guide (Step-by-Step): Safety First: Park the vehicle on a level surface, engage the parking brake, and let the brakes cool. Wheel Removal: Remove the wheels to access the calipers. Refer to your vehicle manual if needed. Clean the Calipers: Wash calipers with soap and water, then use rubbing alcohol to remove grease and dirt. Test Fit: Place the covers over the calipers to check fitment. Apply Silicone Adhesive: Apply high-temp silicone adhesive inside the covers (adhesive not included). Attach Covers: Press the covers firmly onto the calipers. Use painter’s tape or clamps if necessary during curing. Curing Time: Allow adhesive to cure fully (typically 12–24 hours) before driving. Reinstall Wheels: Once cured, reinstall wheels and tighten lug nuts in a star pattern. Final Inspection: Confirm covers are secure and test brakes at low speed.